Huawei HN8010Ts XGS-PON ONT terminal 1x 10GE 1x SC/APC

Huawei HN8010Ts
o.a. geschikt voor Delta Fiber

Huawei HN8010Ts is an ONU client terminal adapted to the XGS-PON network. It was equipped with a 10G Ethernet port and an SC/APC connector. It is the basic client terminal that performs the bridge function. The Ethernet port supports auto-negotiation of the connection speed, it can operate in the 100 Mb/s, 1 Gb/s, 2.5 Gb/s, 5 Gb/s or 10 Gb/s mode. Perfect for symmetrical XGS-PON networks, both as a solution for a consumer and a corporate client.

The offered product supports the XGS-PON standard, as WAN it uses an SC/APC port. XGS-PON provides symmetrical data transmission with a bandwidth of 10/10 Gb/s. This is the main feature that distinguishes it from the XG-PON standard, where the speed is asymmetrically 10 / 2.5 Gb/s. It differs from GPON (apart from the bandwidth, which in GPON is 2.5 / 1.25 Gb/s) and also the maximum split. XGS-PON supports 1x256 split, while GPON only 1x128. Thanks to this, you can connect twice as many subscribers per port. XGS-PON transmission uses different wavelengths than XG-PON and GPON, so using 1 optical fiber you can make three transmissions in different standards.

1x 10G Ethernet

Huawei HN8010Ts is a basic ONT terminal that supports the bridge function. It has been equipped with a 10G Ethernet port ensuring very high network bandwidth. Supports auto-negotiation, can operate at 100 Mb/s, 1 Gb/s, 2.5 Gb/s, 5 Gb/s or 10 Gb/s. Thanks to this, you can use a router with a 2.5G or even 1G port. It also increases the range of subscriptions you can offer to your subscribers.

	Datasheet
	Weblog met uitleg voor DELTA